Outlets Available |  | 2 - 20 amp (unswitched)
|
|
Load Ratings | | 20A at 120 volts, single phase, 50-60 Hz; full load regulation 1%.
|
|
Endurance Test | | 1,000 surges of 6,000 volts, 3,000 amperes, SRV <400 volts, no failures, L-N (ground wire protection) mode, U.S. Gov't. Mode 1.
|
|
Limiters | | Series surge reactor current limiter; cascaded, auto-tracking dual polarity voltage limiters; dual pulse inverters. Parameters optimized for switch-mode power supply protection.
|
|
Clamping Voltage Onset | | 172 volts nominal; 2 volts above peak line voltage (auto-tracking).
|
|
EMI/RFI Filter Response | | (bi-directional, wave tracking): With 50 ohm Rg load: 3db at 5kHz; 26dB at 100kHz; 38dB at 300kHz.
|
|
Let-Through Slew Rate | | 5,000 volt/microsecond disturbance reduced to 28v/microsecond within AC power wave envelope, and less than 10v/microsecond outside the power wave envelope.
|
|
Maximum Applied Surge Pulse Joule Rating | | Unlimited rating (due to surge current limiting) (8x20microsecond).
|
|
Maximum Applied Surge Pulse Voltage | | 6,000 volts (1.2 x 50 microseconds) (Industry Standard rating).
|
|
Maximum Applied Surge Pulse Current | | >100,000 amperes (unlimited due to current limiting) (8 x 20 microseconds).
|
|
Endurance, C62.41-1991 (formerly IEEE 587) Category B3 (C1) pulses | | 2kv>100,000; 4kv>10,000; 6kv>1,000 (NRTL verified).
|
|
Dimensions | | 3" H x 8.5" W x 4" D
|
|
Weight | | 6.5 lbs.
|
|
